Oblong Master Link (Type M)

Extra width (B dimension) inside allows better fit on larger crane hooks
Well suited for use with chain, wire rope, and synthetic slings.
Full traceability for each component
Each of the components has been Proof tested and certified

DESIGN FACTOR 5: FOR USE WITH WIRE ROPE (Sizing table 1 of 3)

TRADE SIZE		MODEL	GRADE	WORKING LOAD LIMIT	DIMENSIONS (INCHES)			WEIGHT
IN	MM			* (Lbs) at 90°	L	B	D	lbs
3/8	11	M-6-10	100	3,300	3.9	2.4	0.43	0.44
1/2	14	M-86-10	100	7,000	4.7	2.8	0.55	0.88
5/8	17	M-108-10	100	11,400	5.5	3.1	0.67	1.8
3/4	19	M-13-10	100	12,300	5.9	3.5	0.75	2.2
7/8	22	M-1310-10	100	17,200	6.3	3.7	0.87	3.3
1	28	M-1613-10	100	29,900	7.5	4.3	1.1	5.1
1-1/4	30	M-19-10	100	35,200	7.9	4.7	1.2	7.7
1-3/8	34	M-2016-10	100	45,300	9.4	5.5	1.3	11.7
1-1/2	38	M-2220-10	100	68,000	9.8	5.9	1.5	15.4
1-5/8	40	M-2622-10	100	70,400	9.8	5.9	1.6	17.2
1-3/4	45	M-32-10	100	84,900	11.8	7.1	1.8	26.4
2	50	M-3226-10	100	102,600	11.8	7.9	2.0	33.1
2-1/4	55	M-3632-10	100	143,100	13.8	7.9	2.2	46.3
2-1/2	60	M-4536-10	100	160,000	14.8	8.3	2.4	57.3
2-3/4	70	M-90T-10	100	220,200	17.7	9.8	2.8	94.8
3-1/4	80	M-125T-10	100	275,300	17.7	10.2	3.1	125.6

*Design Factor 5:1, Proof tested to 2 times Working load limit
Working load limit for Single Leg Sling
M master link series replace the MF & O master link series.

Type M Master Link Selection Table For Grade 80 Alloy Chain Slings (Sizing table 2 of 3)

Model	1-leg 90o			2-leg 60o
Model	Chain Size		Working Load Limit (lbs)	Chain Size		Working Load Limit
	in	mm		in	mm
M-6-10	7/32	6	2,100
M-86-10	9/32	7	3,500
M-86-10	5/16	8	4,500	7/32	6	3,600
M-108-10	3/8	10	7,100	9/32	7	6,100
M-108-10				5/16	8	7,800
M-13-10	1/2	13	12,000	3/8	10	12,300
M-1613-10	5/8	16	18,100	1/2	13	20,800
M-19-10	3/4	20	28,300	5/8	16	31,300
M-2220-10	7/8	22	34,200	3/4	20	49,000
M-2620-10	7/8	22	34,200	3/4	20	49,000
M-2622-10	1	26	47,000	7/8	22	59,200
M-32226-10	1/14	32	72,300	1	26	82,600
M-3632-10				1-1/4	32	125,200

*Design Factor 4:1
M master link series replaces the O master link series

Type M Master Link Selection Table For Grade 100 Alloy Chain Slings (Sizing table 3 0f 3)

Model	1-leg 90o			2-leg 60o
Model	Chain Size		Working Load Limit	Chain Size		Working Load Limit
	in	mm		in	mm
M-6-10	7/32	6	2,700
M-86-10	9/32	7	4,300
M-86-10	5/16	8	5,700	7/32	6	4,700
M-108-10	3/8	10	8,800	9/32	7	7,400
M-108-10				5/16	8	9,900
M-13-10	1/2	13	15,000
M-1310-10				3/8	10	15,200
M-1610-10	5/8	16	22,600	1/2	13	26,000
M-2016-10				5/8	16	39,100
M-19-10	3/4	20	35,300
M-2622-10				3/4	20	61,100

*Design Factor 4:1
M master link series replaces the O master link series

<--- back