• Available in a 1/2, 1, 2, and 3 ton capacity
• Can be used for both vertical and horizontal to vertical
lifting through 180°
• Drop forged and heat treated components, with gripping
surfaces of case hardened alloy steel
• Exclusive feature is a patented wear indicator system.
When any of cam’s straight line, convex teeth are flattened
between unique wear indicator grooves, it is time to change
the cam
• Note: The Pad and Cam should be replaced at the same
time
• Newly designed “Cam Engaging Locking Lever” keeps the
cam in contact with the plate. The tension arm and spring
mechanism facilitate attaching and removing the clamp.
These clamps will not lift plate when in the “lever open”
position
• Clamps are 100% Proof Tested and Certificate of Test
supplied with each clamp
• Warning: Never tamper with a clamp’s tension arm and
spring mechanism during a lift

To prevent the possibility of serious bodily injury:
• DO NOT EXCEED the working load limit.
• DO NOT shock or impact load.
• DO NOT USE if the fitting is visibly distorted or worn.