CTY CỔ PHẦN PHÁT TRIỂN KINH TẾ ĐÔNG NAM Á :. cáp vải,cáp cẩu,cáp thép lõi thép,sling

Omega (Crosby - USA)

Omega (Crosby - USA)

Bolt type anchor shackles (Crosby - USA):

• Capacities 1/3 thru 55 metric tons.
• Forged - Quenched and Tempered, with alloy pins.
• Working Load Limit permanently shown on every shackle.
• Hot Dip galvanized or Self Colored.
• Shackles 25t and larger are RFID EQUIPPED.
• Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order.
• Shackles are Quenched and Tempered and can meet DNV impact requirements of 42 joules at -20 C.
• Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
• Look for the Red Pin® . . . the mark of genuine Crosby quality.
• Type Approval and certification in accordance with ABS 2006 Steel Vessel
Rules 1-1-17.7, and ABS Guide for Certification of Cranes.

Specifications:

Nominal Size (in.)	Working Load Limit (t)*	Stock No.		Weight Each (lbs.)	Dimentions (in.)									Tolerance +/-
Nominal Size (in.)	Working Load Limit (t)*	G-2130	S-2130	Weight Each (lbs.)	A	B	C	D	E	F	H	L	N	C	A
3/16	1/3	1019464	-	0.3	9.65	6.35	22.4	4.85	15.2	14.2	37.3	24.9	4.85	1.50	1.50
1/4	1/2	1019466	-	0.5	11.9	7.85	28.7	6.35	19.8	15.5	46.7	32.5	6.35	1.50	1.50
5/16	3/4	1019468	-	.10	13.5	9.65	31.0	7.85	21.3	19.1	53.0	37.3	7.85	3.30	1.50
3/8	1	1019470	-	.22	16.8	11.2	36.6	9.65	26.2	23.1	63.0	45.2	9.65	3.30	1.50
7/16	1-1/2	1019471	-	.36	19.1	12.7	42.9	11.2	29.5	26.9	74.0	51.5	11.2	3.30	1.50
1/2	2	1019472	1019481	.62	20.6	16.0	47.8	12.7	33.3	30.2	83.5	58.5	12.7	3.30	1.50
5/8	3-1/4	1019490	1019506	1.23	26.9	19.1	60.5	16.0	42.9	38.1	106	74.5	17.5	3.30	1.50
3/4	4-3/4	1019515	1019524	1.79	31.8	22.4	71.5	19.1	51.0	46.0	126	89.0	20.6	6.35	1.50
7/8	6-1/2	1019533	1019542	2.28	36.6	25.4	84.0	22.4	58.0	53.0	148	102	24.6	6.35	1.50
1	8-1/2	1019551	1019560	3.75	42.9	1.15	95.5	25.4	68.5	60.5	167	119	26.9	6.35	1.50
1-1/8	9-1/2	1019579	1019588	5.31	46.0	1.25	108	28.7	74.0	68.5	190	131	31.8	6.35	1.50
1-1/4	12	1019597	1019604	7.18	51.5	1.40	119	31.8	82.5	76.0	210	146	35.1	6.35	1.50
1-3/8	13-1/2	1019613	1019622	8.62	57.0	1.53	133	35.1	92.0	84.0	233	162	38.1	6.35	3.30
1-1/2	17	1019631	1019640	15.4	60.5	1.66	146	38.1	98.5	92.0	254	175	41.1	6.35	3.30
1-3/4	25	1019659	1019668	23.7	73.0	2.04	178	44.5	127	106	313	225	57.0	6.35	3.30
2	35	1019677	1019686	44.6	82.5	2.30	197	51.0	146	122	348	253	61.0	6.35	3.30
2-1/2	55	1019695	1019702	70	1.5	2.80	267	66.5	184	145	453	327	79.5	6.35	6.35
3	85	1019711	-	120	127	3.30	330	76.0	200	165	546	365	92.0	6.35	6.35
3-1/2	120	1019739	-	153	133	3.76	372	92.0	229	203	626	419	105	6.35	6.35
4	150	1019757	-	338.00	140	4.26	368	104	254	229	653	468	116	6.35	6.35

* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the
Working Load Limit.

<--- back