CTY CỔ PHẦN PHÁT TRIỂN KINH TẾ ĐÔNG NAM Á :. cáp vải,cáp cẩu,cáp thép lõi thép,sling

Dee (Crosby - USA)

Dee (Crosby - USA)

Screw pin chain shackles (Crosby - USA):

Nominal size (in.)	Working load limit(t)*	Stock No.		Weight Each (kg)	Dimension (mm.)										Tolerance +/-
Nominal size (in.)	Working load limit(t)*	G-210	S-210	Weight Each (kg)	A	B	C	D	E	F	G	K	L	M	G	A
1/4	1/2	1019150	1019169	.05	11.9	7.85	6.35	6.35	24.6	15.5	22.4	40.4	4.85	35.1	1.5	1.5
5/16	3/4	1019178	1019187	.08	13.5	9.65	7.85	7.85	29.5	19.1	26.2	48.5	5.6	42.2	1.5	1.5
3/8	1	1019196	1019203	.13	16.8	11.2	9.65	9.65	35.8	23.1	31.8	58.5	6.35	51.5	3.30	1.5
7/16	1-1/2	1019212	1019221	.20	19.1	12.7	11.2	11.2	41.4	36.6	67.5	7.85	60.5	2.37	3.30	1.50
1/2	2	1019230	1019249	.27	20.6	16.0	12.7	12.7	46.0	30.2	41.4	77.0	9.65	68.5	3.30	1.50
5/8	3-1/4	1019258	1019267	.57	26.9	19.1	15.7	16.0	58.5	38.1	51.0	95.5	11.2	85.0	3.30	1.50
3/4	4-3/4	1019267	1019285	1.20	31.8	22.4	20.6	19.1	70.0	46.0	60.5	115	12.7	101	6.35	1.50
7/8	6-1/2	1019294	1019301	1.43	36.6	25.4	24.6	22.4	81.0	53.0	71.5	135	12.7	114	6.35	1.5
1	8-1/2	1019310	1019329	2.15	42.9	28.7	25.4	25.4	93.5	60.5	81.0	151	14.2	129	6.35	1.50
1-1/8	9-1/2	1019338	1019347	3.06	46.0	31.8	31.8	28.7	103	68.5	91.0	172	16.0	142	6.35	1.50
1-1/4	12	1019356	1019365	4.11	51.5	35.1	35.1	31.8	115	76.0	100	191	17.5	156	6.35	3.30
1-3/8	13-1/2	1019374	1019383	5.28	57.0	38.1	38.1	35.1	127	84.0	111	210	19.1	174	6.35	3.30
1-1/2	17	1019392	1019409	7.23	60.5	41.4	41.1	38.1	137	92.0	122	230	20.6	187	6.35	3.30
1-3/4	25	1019418	1019427	12.1	73.0	51.0	54.0	44.5	162	106	146	279	25.4	231	6.35	3.30
2	35	1019436	1019445	19.2	82.5	57.0	60.0	51.0	184	122	172	312	31.0	263	6.35	3.30
2-1/2	55	1019454	1019463	32.5	105	70.0	66.5	66.5	238	145	203	377	35.1	330	6.35	6.35

• Capacities 1/3 thru 55 metric tons.
• Forged - Quenched and Tempered, with alloy pins.
• Working Load Limit permanently shown on every shackle.
• Hot Dip galvanized or Self Colored.
• Shackles 25t and larger are RFID EQUIPPED.
• Shackles can be furnished proof tested with
certificates to designated standards, such as ABS, DNV, Lloyds, or other
certification. Charges for proof testing and certification available when
requested at the time of order.
• Shackles are Quenched and Tempered and can meet DNV impact
requirements of 42 joules at -20 C.
• Crosby products meet or exceed all requirements of ASME B30.26
including identification, ductility, design factor, proof load and temperature
requirements. Importantly, Crosby products meet
other critical performance requirements including fatigue life,
impact properties and material traceability, not addressed by
ASME B30.26.
• Look for the Red Pin® . . . the mark of genuine Crosby quality.
• Type Approval and certification in accordance with ABS 2006 Steel Vessel
Rules 1-1-17.7, and ABS Guide for Certification of Cranes.

Specifications:

* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the
Working Load Limit.

<--- back